Glass block spacer

Description

Glass block spacer (pack of 30 pieces)
Glass block spacer, the use of double-walled glass blocks has long been used for creating space and partitioning and other things, and it has been widely used in buildings to build internal and external walls, as well as to build beautiful and colorful glass partition walls.

Glass blocks are produced in a variety of colors and from two walls of vacuum-molded glass, with the space between the glasses being empty, with a thickness of 8 cm. Due to the double-walled glass blocks, they are very good insulation against cold, heat and sound, and they also have high resistance.

In addition to the beauty of glass blocks, according to the things that were said about the insulation of glass blocks regarding heat, cold and sound, it has become one of the practical structural elements in building construction. One of the unique characteristics of glass blocks is the reflection of light, which, due to its color and the possibility of using glass blocks of different colors in a wall or partition, we will see the reflection of beautiful colored lights.

Glass block spacers are needed to install and assemble glass blocks. This piece is produced and presented from compressed plastic. Glass block spacers are produced in two sizes, 10 and 5 mm, and if each is used, the same amount of distance will be created between the glass blocks.

Method of Use :
The glass block spacer is placed at the junction or intersection of the glass blocks. The method of installing glass blocks is as follows. First, special mortar is applied on the surface that is supposed to be covered by double-walled glass blocks, porcelain walls or partitions, and then the first block is placed.

Then the spacer of the glass block is placed below and above the junction with the next block and the next block is placed. In the same way, by placing spacers and expanding the blocks in the longitudinal and transverse directions and applying mortar or special glue between the blocks, the desired wall or partition is completed.

Consumption :
The consumption of glass block spacer is determined according to the joints or the intersection between the glass blocks.

Hints :
According to the taste, a 10 or 5 mm spacer can be used to install the glass block, which will create the same size between the blocks.
In addition to placing the glass block spacer in the longitudinal and transverse directions, it is necessary to use special mortar or glue in all the joints of the glass blocks to connect to each other, the minimum time for drying and using it is 24 hours. be
After finishing building the wall with glass blocks, cut the protruding part of the glass block spacer with a cutter and tie the space between the blocks.