Gunya meter 5 arms x850 two stencils

Description

Gunya meter 5 arms x850 two stencils
The 5-arm goniometer, which is also a double pipe template, consists of 5 arms with a 25 cm ruler in the middle and two 15 cm rulers around it, and as a result, 2 pipe templates are placed on both sides so that it can be At the same time, he copied the location of two pipes and executed it on the desired surface.

This type of gunia meter, which has 5 arms and 2 pipe templates, is very efficient and a widely used tool in the hands of tilers, plumbers, cabinet makers, etc. Due to having more arms, this product has made it easier to copy and model places far from reach.

This goniometer is suitable for relatively large surfaces and, in addition to the uses that can be obtained from a normal goniometer, it enables simultaneous copying of two tubes. The parts of this efficient tool are connected to each other by 6 bolts and screws, and it can be placed in different shapes easily by loosening and tightening the bolts. By removing the two tube templates from the sides of the goniometer, a 5-arm protractor or goniometer will be formed, which can easily be used to copy and create all kinds of geometric forms such as rhombuses, triangles, squares, and rectangles.

In addition, in this case, many long and far away copies can be made easily. It is necessary to say that by having a 5-arm gunia meter with two tube templates, you can make different models of gunia meters with one tube template or two templates by adding and removing parts with the help of opening and closing screws. Tube or without tube template created.

applications :
For use by facility professionals
Professional tool for ceramic tile installers
For use by carpenters and cabinet makers and…
For domestic use

Physical and chemical characteristics:
Having a 25 cm ruler calibrated based on the metric and inch systems
Having 4 rulers of 15 cm calibrated based on the metric and inch system
Having 2 templates for pipes
Having 6 sets of flaky bolts and nuts with the ability to open and close easily without the need for pliers or a wrench
Having a minimum measurement accuracy of 1 mm

How to use:
By loosening and tightening the screw, put the rulers in the desired position and copy the exact location of the pipes using special pipe templates. After that, transfer the goniometer to the tile or ceramic, and after drawing the shape on the part, cut it and then place the part in the desired place. This tool can also be used as a linear vector copy tool.